IQxel-M™ Bluetooth® Advanced measurement system for fast and efficient over-the-air (OTA) testing of Bluetooth® low energy
devices.
Using LitePoint's proprietary measurement techniques, testing Bluetooth® devices is simpler, faster and better than ever before.
Bluetooth® LE Test Solution
* Compatible with any Bluetooth® low energy peripheral or beacon device
* Simple turnkey test solution works with all Bluetooth® LE chipsets
* No setup required-Device simply needs to be transmitting advertising packets
* No need to install special software on the DUT-test with device's production firmware
* No DUT communication port needed
* Test can be radiated or conducted
Robust RF Parametric Test Coverage
* Transmitter power, modulation quality, in-band emissions
* Receiver sensitivity and PER
* Results for Low, Mid and High channels
Advanced Measurement Methodology
* Performs transmitter and receiver measurements using dedicated advertising channels (which transmit beacon signals/establish a
connection with a controller), which enables excellent coverage and confidence in the parametric performance of the device
* Uses normal commercial firmware, which further improves confidence that results are correlated with actual performance of real
devices
High Speed Manufacturing Throughput
* Typical transmitter and receiver test performed in <5 seconds for all advertising channels
* Very rapid test ensures both transmitter and receiver are functional and performing within user defined specifications
Bluetooth® Technology Options
* Bluetooth®, Low Energy (4.0, 4.1, 4.2)
Lab and Manufacturing Test Solution
* In the lab or manufacturing environments
* For final product testing lifecycle stages
* For Bluetooth® low energy-enabled IoT devices
IQxel-M is a high-performance tester used for wireless communication testing, mainly for verifying and testing devices that support wireless technologies such as Wi Fi, Bluetooth, Zigbee, etc. The following is detailed information about the measurement range of IQxel-M:
Measurement range of IQxel-M
Frequency range:
The frequency range supported by IQxel-M is from 100 MHz to 7.5 GHz.
This wide frequency range enables it to cover multiple wireless communication standards, including Wi Fi, Bluetooth, Zigbee, LTE, and more.
Modulation bandwidth:
The supported modulation bandwidth is up to 160 MHz, which can meet the testing requirements of high bandwidth wireless communication technologies such as Wi Fi 6 (802.11ax) and 5G NR.
Output power range:
Output power range:- 60 dBm to+6 dBm.
Provide precise power control and simulate testing scenarios with different signal strengths.
Input power range:
Input power range:- 40 dBm to+20 dBm.
Supports high dynamic range signal input, suitable for receiver sensitivity testing and signal analysis.
Dynamic range:
Dynamic range: up to 110 dB, capable of accurately measuring weak signals and high-power signals.
EVM (Error Vector Magnitude) measurement range:
EVM measurement range: as low as -50 dB, supporting high-precision modulation quality analysis.
Supported wireless standards:
Wi-Fi:802.11a/b/g/n/ac/ax.
Bluetooth: Bluetooth Classic and Bluetooth Low Energy (BLE).
Zigbee:IEEE 802.15.4.
LTE: Supports LTE-FDD and LTE-TDD.
Other: Supports multiple proprietary protocols and custom modulation schemes.
Other key measurement functions
Spectrum analysis:
Provide high-resolution spectrum analysis function, supporting detailed analysis of frequency domain signals.
Power measurement:
Support measurement of average power, peak power, and power spectral density (PSD).
Modulation analysis:
Support modulation quality analysis, including key parameters such as EVM, frequency error, phase noise, etc.
Receiver testing:
Support receiver sensitivity testing, packet error rate (PER) testing, and bit error rate (BER) testing.
Signal generation:
Built in high-precision signal generator, supporting complex modulation signal generation, used for equipment calibration and performance verification.
Audited Supplier 
){kind=link}