IQxel-MW is a high-performance tester used for wireless communication testing, mainly for verifying and testing devices that support wireless technologies such as Wi Fi, Bluetooth, Zigbee, etc
IQxel-MW ™ It is a comprehensive multi device testing solution for next-generation wireless connectivity devices, suitable for research and mass production. The options include:
Wi Fi, 802.11ax*
Wi Fi, 802.11a/af/ah/b/g/j/n/p
Wi Fi, 802.11ac Wave 1 & Wave 2
Blue buds, conventional (1-4. x) and low-power (4.0, 4.1, 4.2), Blue buds 5
Supports 8 × 8 true MIMO
ZigBee Z-Wave,Wi-SUN,IEEE 802.15.4
DECT
TD-LTE
Navigation: GPS,GLONASS,COMPASS
Specially designed for testing 802.11ax requirements
Define residual EVM performance of similar solution standards: better than -50 dB (typical value, 802.11ax 80 MHz)
RF port configurability: A single port can support 80+80 to 160+160 signal combinations
Can achieve synchronous dual band testing (2.4 GHz and 5 GHz): ensuring the performance of TX/TX, TX/RX, and RX/RX operating modes
Support single user OFDMA, multi-user OFDMA, multi-user MIMO
High testing throughput suitable for production
Can be accessed through LitePoint's Packet Engine ™ Technology enables testing speed and efficiency in the industry
Can utilize parallel multi DUT testing architecture to improve production capacity and shorten time to market
MIMO support is upgradable
The architecture supports up to 8x8 true MIMO expansion (requires the use of 2 IQxel MW 16 port testers)
Optimization for Multi User MIMO (MU-MIMO) Measurement
Support beamforming and advanced phase verification
Initiate testing using a comprehensive software solution
Utilize IQfact+ ™ Software solution testing mainly focuses on WLAN and Bluetooth chipset
The constantly expanding testing solution library of hundreds of chip sets can save setup time and development costs
Backward compatibility with existing LitePoint connection testing systems
*Compliant with IEEE draft specifications
Performance, suitable for next-generation Wi Fi -802.11ax
LitePoint IQxel MW is a testing solution for next-generation Wi Fi technology. IQxel MW is an ideal choice for research and mass production, suitable for 802.11, Bluetooth, and other applications Common wireless connection standards such as DECT and ZigBee enable high-performance testing. In addition, IQxel MW can provide efficient parallel testing for 16 devices simultaneously.
Due to the adoption of 802.11ac and 802.11ax technologies by device manufacturers, product requirements are becoming increasingly complex, and the required testing setups are also becoming more complex. The new IQxel MW feature simplifies production testing and reduces production costs. The IQxel MW series offers three configurations, 2-port and 8-port, supporting 2x2 and 4x4 true MIMO testing respectively. It can be extended to support 8x8 true MIMO testing by stacking multiple testers.
802.11ax has been launched on the market and will be highly praised by customers. However, the inherent complexity of technology will lead to stricter hardware specifications and increased modulation and EVM requirements. In order to meet the requirements of 802.11ax, IQxel MW provides rare EVM performance at 160 MHz bandwidth. Excellent performance eliminates measurement uncertainty and provides you with authentic device performance.
Simplify application deployment with flexible and integrated front-end
IQxel MW's integrated front-end covers all 802.11ac Wave 2 and 802.11ax test configurations, including 80 160 80+80 MHz, dual band concurrency, and implicit beamforming on a single antenna, without the need for external components. This type of front-end device enables users to flexibly establish production lines and reduce overall production costs.
WLAN routers and wireless access points
Wireless Home Gateway
Wireless connection of set-top box
WLAN module and network interface card (NIC)
WLAN/Bluetooth SiP (System in Package) devices
WLAN MIMO devices
Smartphone
Tablet computer
Frequency range:
400 MHz to 6000 MHz
Output power range:
Single port operation:
0 to -95 dBm (400 MHz to 6000 MHz)
All ports working:
-5 to -95 dBm (400 MHz to ≤ 4900 MHz)
-15 to -95 dBm (>4900 MHz)
Supported technologies:
Wi Fi, 802.11a
Wi Fi, 802.11b
Wi Fi, 802.11g
Wi Fi, 802.11j
Wi Fi, 802.11n
Wi Fi, 802.11p
Wi Fi, 802.11ac (optional)
Wi Fi, 802.11af (optional)
Wi Fi, 802.11ah (optional)
Wi Fi, 802.11ax (optional)
Blue buds 1. x (optional)
Blue buds 2. x (optional)
Blue Sprout 3. x (optional)
Blue buds 4. x (optional)
Low Energy Bluetooth (BLE) 4.0 4.1, 4.2 (optional)
Blue Sprout 5 (optional)
DECT (optional)
ZigBee/Z-Wave/Wi Sun/IEEE 802.15.4 (optional)
TD-LTE (optional)
Audited Supplier 
){kind=link}