| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Function: | Storage |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The E6640A EXM wireless test set scales with your production needs and is in sync with the latest cellular and WLAN chipsets. It delivers the speed, accuracy, and port density you need to ramp up rapidly and optimize full-volume manufacturing.
A Cost-Effective and Repeatable Wireless Device Manufacturing Solution
In wireless device manufacturing, meeting ever-tougher goals and tighter schedules is easier when you have access to the best resources. The Keysight E6640A EXM Wireless Test Set scales with your production needs and is in sync with the latest cellular and wireless local area network (WLAN) chipsets. Better yet, it delivers the speed, accuracy, and port density you need to ramp up rapidly and optimize fullvolume manufacturing. The EXM is designed for multi-device testing with up to four transceivers (TRX), each with vector signal analyzer (VSA), vector signal generator (VSG), and four-port radio frequency input and output connections (RFIO). Multi-format cellular and WLAN devices are easily tested with this one solution.
• Optimize multi-device testing with up to four TRX channels per EXM
• Easily test multi-format devices with standards-based Keysight PathWave X-Series Measurement Applications
• Achieve maximum throughput with raw hardware speed and advanced sequencing
• Increase yield with superior signal quality and measurement accuracy
Scale your production line with TRX modules
Each TRX module contains fully integrated VSA, VSG, and RFIO. The RFIO uses rugged N-type connectors with four full-duplex (FD) ports (default) and is designed for the demanding wireless device manufacturing environment.
Each TRX module supports cellular and wireless connectivity bands and bandwidths. New TRX modules can be added to existing chassis to contain up to four TRX.
Software applications test many technologies
Get consistent and repeatable results with standards-based PathWave X-Series Measurement Applications from Keysight. One application license covers up to four TRX units per chassis. Test the following technologies.
Cellular
• 5G NR (Figures 1 and 2)
• C-V2X
• LTE and LTE-Advanced TDD and FDD with carrier aggregation for inter- and intra-band scenarios
• NB-IoT and eMTC
• W-CDMA and HSPA+
• GSM, EDGE, and EDGE Evo
Wireless connectivity
• WLAN 802.11a/b/g/j/p/n/af/ah/ac/ax with MIMO (2x2, 3x3, 4x4), switched MIMO for manufacturing test, and true MIMO using multiple TRX for design verification
• Bluetooth®, EDR, BLE, and BT 5.2
• GNSS: GPS, Galileo, GLONASS, Beidou, SBAS, and QZSS
• Digital video
Performance Characteristics
Definitions
Specification (spec)
The warranted performance of a calibrated instrument that has been stored for a minimum of 2 hours within the operating temperature range and after a 45-minute warm up period. Specifications are valid from 20 to 35 °C unless otherwise noted.
Typical (typ)
The characteristic performance, that 95 percent of the units exhibit with a 95 percent confidence level. This data, shown in Italics, is not warranted, does not include measurement uncertainty, and is valid only at room temperature (approximately 25 °C).
Nominal
The mean or average characteristic performance, or the value of an attribute that is determined by design. This data is not warranted and is measured at room temperature (approximately 25 °C).
Conditions
These additional conditions are required for the test set to meet its specifications.
• RF, IF, and source alignments have been run within the previous 7 days
• ALL alignment has been run either within the previous 8 hours or if the temperature has changed more than 5 °C from the previous ALL alignment
Vector signal analyzer performance
All options apply to TRX modules unless otherwise noted.
The Keysight E6640A EXM wireless test set uses Keysight's industry-proven platform for multidevice and multiformat nonsignaling manufacturing test in a single compact configuration. Integrated state-of-the-art automation and efficient sequencing for optimized speed of execution help reduce 5G device manufacturing cost of test and speed up time to market.
Keysight's EXM wireless test set uses integrated 5G NR waveform and measurement software to verify RF performance of mobile devices. Its scalable architecture enables users to stay up to date with the latest cellular and WLAN chipset standards. The EXM delivers the speed, accuracy, and port density required to quickly ramp up and optimize full-volume manufacturing.
Optimize multidevice testing:
Test multiformat devices:
Maximize throughput and yield:
Efficiently verify chipset RF performance:
Create flexible systems for high-volume manufacturing of wireless devices:
Confidently verify 802.11ac/ax MIMO design implementation and efficiently test in production on a single platform:
1,Who are we?
Dongguan Qihang Electronic Technology Co., Ltd. is a professional company engaged in the research and development, sales, maintenance, measurement, technical consulting, and provision of Bluetooth RF testing systems and testing solutions for RF, microwave, and electronic testing instruments.
2,How to ensure quality?
Before shipment, our quality inspector will conduct a comprehensive test of the product to ensure that the customer receives the instrument without any issues
3,What can I buy from here?
We can provide various instruments for Keysight, Ceyear, Tektronix, Rohde&Schwarz, Agilent, Keithley, Anritsu, and Lecroy
4,Why do you want to purchase from us instead of other suppliers?
We have good prices and the advantage of overseas warehouses, which can make the goods arrive faster. And a good after-sales solution.
5,Where do we ship from and how long is the delivery time?
Shipping from Guangdong, China, with a delivery time of 15 working days.
){kind=link}